Drop-in replacement handguard for the HK416/MR556 that uses the factory HK barrel nut. Made from 6061-T6 with Type 3 hardcoat to military spec.
- For HK416 / MR556
- Uses stock HK barrel nut
- M-LOK
- 10.5" or 14.5"
Specifications
| Height | 2.61" |
|---|---|
| Material | 6061-T6 |
| Finish | Type 3 Hardcoat Anodize |
| Inner diameter | 1.35" |
| Outer diameter (DAQ*) | 2.08" |
Configurations
| Length | Weight |
|---|---|
| 10.5" | 10.3oz |
| 14.5" | 14.2oz |
Notes
Disclaimer: If the HK upper receiver group has sling loops on the outside of the gas block they will need to be removed for installation. This is a permanent modification. Geissele recommends this procedure be done by a certified and professional gunsmith/armorer.
$500.00
